How to Make an External Hard Drive From Your Old, Disused PC

Today we are going to learn how to make an external hardrive from your old pc used pc. This is offer to really good thing to do because purchasing external hardrive is be made can often cost around of $100 were is hear by making one old pc your only spending around $10 to $20 it also good thing because itself to sleeting your old pc sitting around us should to be able those will get some new part of it. The first step is to remove the side panel of your pc this is usually very easy to do and only unscrews the two screws that behind on your pc. Then you can remove the side panel simply by sliding it towards at the back then can all unclip as you can see to easy take it off .Now in part of your pc complicated and scary but there’s nothing way about it.

Usually you’ll find on top on your CD drive or DVD drives its more reason computer and underneath you’ll be able to find hard drive which is smaller and thinner all you need to do is remove the screws that might be attaching it to the case and then remove the wire in the back and then you can take the hard drive out of your old pc then you have an order an external hard drive case or an enclosure from internet a simple goggle search for an external hard drive enclosure will give you result rules. Wants you receive your case which’s cost around $10 to $20 at the minimum or may be bit more if you going for higher end case for a $30 then you will receive it and extremely simple to insert a hard drive into case usually your case you’ll come some source of carrying pouch or a soft case to make an easy to transport.

So just take a hard drive out get the small screwdriver and remove the back panel of the case. Here from the demonstration will be using 2.5 inch. Part drive case which is made or hard drive coming from a laptop to defuse the hard drive from your desktop to only to order 3.5 inch. Case so make sure you get the right one when you want to go around measurement 2.5 inch. The laptop hard drive 3.5 inch. From hard drive from desktop. So simply move the back panel in the case, which is one, which has spaces the bugs to be inserted so other one should be blank and smooth. You usually this is two screws simple screws just take to out unable to remove the cover were easy.

Are you can simply plug in your hard drive until back wiring in the case in internal part to use very carefully so not to them the break in the middle the connecting part form it has the back side. That‘s it now you can connected your hard drive all you have to do is carefully slide it back in the case. Ok once you’re done simply to put squeeze back on the back side panel and then the hard drive will be ready to go.

One thing that you keep in your mind in external hard drives it is yet very careful not to drop them hard drives is very easy to make a read book by dropping and then when you lost all your data which is safe on it. Now if you’re done to connect your hard drive to your pc just use the cable that supply open the who hub smaller on to your hard drives and one for sometimes two and plug in to your computer by the USB port. Now once you pug in to your computer before functions correctly you may have to use driver cp which as to delivered the case and but most of system must using modern virgin windows you only have to do that simply plug in and will be enough.